Jim Dunlop Straplok Original Strap Retainer System - Gold

Set adapts to instrument by replacing existing strap pins/screws with special Straplok System button/screws.

Two strap attachments are included.

Original slim button design.

• INSTALLATION INSTRUCTIONS
• Please follow instructions very carefully and use
• all provided parts. If you do not feel comfortable
• performing this installation yourself, have it done
• by a reputable luthier or guitar repair technician.
• Locking Pin Assembly:
• 1. Slip locking pin (1) through the recessed washer (2).
• 2. Insert locking pin (1) through strap hole (3).
• 3. Slip flat washer (4) over locking pin (1)
• against strap (3).
• 4. Snap retainer clip (5) into locking pin’s
• shank groove (1).
• Strap Button Instructions:
• 1. Secure body of instrument to a flat surface such
• as a table or workbench and remove existing strap
• buttons.If neck is bolted on,remove it for easier
• access.
• 2. With a 7/64ʺ bit, drill 7/8” deep into existing
• strap button hole.
• 3. Place strap button (6) over hole. Lubricate tip
• of mounting screw (7) with a small amount of wax or
• bar soap and screw it into the strap button hole with a
• #2 Phillips screwdriver.
• 4. Rotate clockwise until snug.
• 5. Repeat for other Straplok button