Saramonic Blink500 ProX B2 Ultracompact 2.4GHz Dual-Channel Wireless Microphone System

The Saramonic Blink 500 ProX B2 is a 2.4 GHz dual wireless system that delivers exceptional, broadcast-quality sound for 2-people to cameras, recorders, mixers, mobile devices, computers, and other 3.5mm input devices. Ideal for content creators, filmmakers, journalists, vloggers, live streaming, and so much more. This ultra-portable and incredibly lightweight dual mic system comes with two clip-on wireless transmitters with built-in mics, two professional lavalier microphones, a dual-channel receiver, and an advanced portable charging carry case.

Upgraded in Every Way: The Industry Original Dual 2.4GHz System Just Keeps Getting Better

The Blink 500 ProX is the next generation of the immensely successful, and much copied Blink 500 Pro system. Combining the innovative features of the original Blink 500 Pro system with a smaller and lighter updated design, less latency, more reliability, upgraded OLED displays with real-time metering, longer battery life, higher resolution audio signal, wider frequency response, higher signal-to-noise ratio, and even more new features that set the ProX apart from the original Pro system and competitors. While still being incredibly easy to use.

Tiny and Light TX Transmitters, with Big and Heavy Features

The Blink 500 ProX TX transmitters feature a built-in omnidirectional microphone with an impressive sensitivity of -39dB. Giving you professional dynamic sound quality on a transmitter small and light enough that you can easily clip it to a shirt or collar. The transmitters include lavalier microphones, allowing you to use them as traditional belt pack transmitters for an even more discreet miking solution. A vivid OLED display gives real-time input level metering, and tactile input gain controls allow you to adjust the audio gain with ease. They also feature a soft-touch mute button to quickly mute the transmitter for privacy.

Wireless Transmit Line-Level Audio and Other 3.5mm Microphones

The Blink 500 ProX TX transmitters also allow you to transmit line-level signal or microphone-level wirelessly and provide plug-in power to microphones. This stand-out feature makes the system tremendously versatile, allowing you to connect it to virtually any audio source. Switch the TX transmitters to line-level and connect them to mixers, music players, or any line-level device output you want to transmit wirelessly to the receiver. You can use the included SR-M1 lavalier, or you can add a headset microphone, a higher-end lavalier like the Saramonic DK3G, or even plug in a mini-shotgun microphone. Just about any 3.5mm microphone wired for standard TRS pin-out will work, and the adjustable mic gain, and input gain meter lets you get perfect levels every time.

Compact Receiver with Headphone Out, OLED Display, Mono/Stereo Out and More

The Blink 500 ProX B2 system’s RX dual-channel receiver includes both a 3.5mm TRS output cable and a 3.5mm TRRS output cable. Allowing the system to work perfectly with cameras, mobile devices, recorders, mixers modern computers, and much more. The RX features a selectable Mono / Stereo output setting, giving you the ability to record each mic to separate channels. Its 3.5mm headphone output with level control lets you monitor the sound in real-time, especially vital if your camera or device lacks a headphone output. It also features a vivid OLED display that shows you the RX’s battery life and headphone level, and each transmitters’ level meter, battery life, and wireless connection strength with just a glance. You can also easily adapt the receiver’s 3.5mm TRS output to Lightning, USB-C, USB, or XLR devices with an inexpensive Saramonic audio adapter or interface (sold separately).

Remarkable Power and Convenience for Creators on the Move

The Blink 500 ProX B2 features a system battery life of up to 10-hours, nearly double the power of other 2.4GHz micro wireless systems. Giving users the ability to shoot for an entire day on one charge! It also includes a 3000mAh carry case that provides an additional 2 and 1/2 full system charges anywhere. That gives you up to an incredible 35-hours of filming on a full system and case charge! Opening the charging case turns the system on and closing the case turns the system off, automatically. Because the transmitters and receiver also feature USB-C charging ports, they can be powered while in use or charged outside of the case using USB battery packs or a power supply for even more powering versatility.

Features:

• Incredibly easy-to-use clip-on wireless mic system with lavaliers that delivers high-quality sound of 2-people to cameras, recorders, mixers, mobile devices, computers, and other 3.5mm input devices
• Transmitters (TX) have a built-in omni mic and can be clipped to clothing, used as a belt pack with included lavaliers, or transmit line-level audio. They feature OLED display with metering, input level control, and mute
• Camera Mountable Dual receiver (RX) features a Mono/Stereo output setting, headphone output for real-time monitoring, a vivid OLED display with metering, and includes 3.5mm TRS and 3.5mm TRRS output cables
• Ultracompact and Lightweight, the system features a remarkable 10-hour battery run time on a full charge, 328-feet (100m) line-of-sight range, and automatic channel switching
• The system powers on and off, automatically when opening and closing the 3000mAh charging case. Case can charge the system up to 2.5 additional times anywhere, for up to an incredible 35-hrs of power on the go

Specifications:

RX Receiver Specifications:

• Reception Type: 2.4GHz Digital Frequency
• Modulation: Digital Modulation
• Antenna: Built-In FPC Antenna
• Operating Range (Without Obstacles): Up to 328' (100m)
• Line Output Connector: 3.5mm TRS
• Output Level: -16.5dBu
• Output Mode Types: Mono / Stereo
• Headphone Output Connector: 3.5mm TRS
• Headphone Output Level: -6dBu
• Frequency Response 20Hz to 20KHz
• Digital Signal Resolution: 16bit / 48kHz
• Signal-to-Noise Ratio: ≥84dB
• Distortion: ≤0.1%
• System’s Voice Delay: ≤8ms
• High-contrast OLED Screen Resolution: 128 x 64 pixels
• Other Functions: Tactile Output Mute Function
• Power Requirements: Built-in Li-ion Battery, USB-C DC 5V or Charging Contact
• Battery Life: Approximately 10-hours
• Battery Specifications: 3.7V / 400mAh
• Weight: 1.08oz (30.5g)
• Dimensions: 2.2 x 1.49 x 0.61” (56 × 38 × 15.5mm)
• Operating Temperatures: 0° to 122°F (0°C to 50°C)
• Storage Temperatures: -50° to 122°F (–10°C to +50°C)

TX Transmitter Specifications:

• Transmission Type: 2.4GHz Digital Frequency
• Modulation: Digital Modulation
• Antenna: Built-In FPC Antenna
• Operating Range (Without Obstacles): Up to 328' (100m)
• RF Output Power: <10mW
• Frequency Response 20Hz to 20KHz
• Reference Audio Input Level: -20~-42dBv (MIC input, 0dB Attenuation)
• Input Connector: 3.5mm Mic In / Line In (Mic with Plug-in-Power)
• Built-in Microphone Polar Pattern: Omnidirectional
• Built-in Microphone Maximum SPL: 106dB
• Built-in Microphone Sensitivity: 39±2dB (Tested at 2V 2.2KΩ)
• Lavalier Microphone Maximum SPL: 120dB
• Lavalier Microphone Sensitivity: 39+/-2dB (0dB=1V/Pa,1kHz)
• Digital Signal Resolution: 16bit / 48kHz
• Signal-to-Noise Ratio: ≥84dB
• Distortion: ≤0.1%
• High-contrast OLED Screen Resolution: 128 x 64 pixels
• Other Functions: Tactile Microphone Mute Function
• Power Requirements: Built-in Li-ion Battery, USB-C DC 5V or Charging Contact
• Battery Life: Approximately 10-hours
• Battery Specifications: 3.7V / 400mAh
• Weight: 1.04oz (29.5g)
• Dimensions: 2.2 x 1.49 x 0.61” (56 × 38 × 15.5mm)
• Operating Temperatures: 0° to 122°F (0°C to 50°C)
• Storage Temperatures: -50° to 122°F (–10°C to +50°C)

SR-M1 Lavalier Specifications:

• Acoustic Principle: Electret Condenser
• Polar Pattern: Omnidirectional
• Connector: 3.5mm
• Cable Length: 4.1’ (1.25m)
• Maximum SPL: 110dB
• Sensitivity: -39dB+/-2dB(0dB=1V/Pa,1kHz)
• Signal-to-Noise Ratio: ≥60dB
• THD: <1% (94dB SPL at 1kHz)
• Power Requirements: Plug-in-Power (1V～10V)
• Standard Operating Voltage: 3V
• Current Consumption: <500μA
• Output Impedance: <2.2KΩ

Blink 500 ProX B2 Charging Case Specifications:

• Power Requirements: Powered by USB-C port
• Power Capacity: 3000mAh
• System Charging Time: Approximately 2-hours
• Case Charging Time: Approximately 2.5-hours
• Charge Cycles for Transmitters and Receiver: Approximately 2.5 Times
• Weight: 9.31oz (264g)
• Dimensions: 6.49 x 3.91 x 1.51” (165 x 899.5 x 38.5mm)
• Operating Temperatures: 0° to 122°F (0°C to 50°C)
• Storage Temperatures: -50° to 122°F (–10°C to +50°C)

In the Box:

• 2 x Blink 500 ProX TX Transmitter with OLED Display, Built-In Microphone and Clip
• 1 x Blink 500 ProX RX Dual Receiver with OLED Display, Built-In Clip and Camera Shoe-Mount
• 1 × Blink 500 ProX B2 Portable Charging Carry Case
• 2 x SR-M1 Omnidirectional Lavalier Microphone
• 2 x Alligator-Style Lavalier Microphone Clip
• 2 x Foam Lavalier Windscreen
• 2 x Furry High-Wind Press-On Windscreen for Blink 500 ProX TX Transmitter
• 1 × Carry Pouch with Accessory Pocket
• 1 x 1’ (30.5 cm) Gold-Plated 3.5mm TRS to TRS Output Cable
• 1 x 1’ (30.5 cm) Gold-Plated 3.5mm TRS to TRRS Output Cable
• 1 x 1’ (30.5 cm) Gold-Plated USB-A to USB-C Charging Cable