Brand: DJI
MODEL: DJI-MIC300
DJI Mic 3 Wireless Microphone Kit (2 TX + 1 RX + Charging Case)
Store finder
Performance That Speaks
- Lightweight & Intuitive, Compact Storage
- 4TX + 8RX Capability & Four-Channel Output
- Adaptive Gain Control for Balanced Volume
- Three Voice Tone Presets, Two-Level Noise Cancelling
- Dual Band Anti-Interference, Lossless Audio Transmission
- Dual-File 32-bit Float Internal Recording
- Integrated Timecode for Seamless Editing
- Extended Operating Time & Fast Charging
The charging case can store the transmitter with the windscreen installed, and also with the magnet or magnetic clip attached. Inside the charging case lid, you can store the magnet, magnetic clip, or locking audio adapter cable. To prevent receiver screen damage, avoid stacking items in the charging case.
To achieve the 4TX + 8RX setup or four-channel output, additional accessories must be purchased separately. The four-channel output feature is only supported by certain Sony camera models (requiring the DJI Mic Series Camera Adapter) and certain computer software (via USB output). For details, refer to the compatibility list on the Downloads page of the official DJI Mic 3 website.
The Adaptive Gain Control feature can be configured via the receiver or the DJI Mimo app, and it is turned off by default.
The Voice Tone Preset modes can be selected via the receiver or the DJI Mimo app, with the default set to Regular.
The Noise Cancelling feature is turned off by default but can be activated and set to either Strong or Basic level through the receiver, DJI Mimo app, or device directly connected via the OsmoAudio™ ecosystem. When using the receiver with multiple transmitters, you can adjust the noise cancelling settings for each transmitter individually or for all transmitters simultaneously. When an Osmo Action 5 Pro, Osmo Action 4, or Osmo Pocket 3 is connected directly via OsmoAudio™, settings can be adjusted on the product interface. When the transmitter is directly connected to a smartphone, the settings can be adjusted within the Mimo app.
Operating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.
Both the transmitter and receiver support 3C fast charging, allowing them to reach 80% charge in just 18 minutes. When the transmitter and receiver are idle and their battery levels drop below 25%, a 5V charger can extend their running time by 2 hours with just 5 minutes of charging. Data was collected in a controlled environment and should be taken as reference only.
In The Box:
- x2 DJI Mic 3 Transmitter
- x1 DJI Mic 3 Receiver
- x1 DJI Mic 3 Charging Case
- x1 DJI Mic 3 Mobile Phone Adapter (USB-C)
- x1 USB-C to USB-C Data Cable
- x1 DJI Mic 3 Locking Audio Adapter Cable (3.5mm TRS to TRS)
- x2 DJI Mic 3 Windscreen (Black/Gray)
- x2 DJI Mic 3 Windscreen (Black)
- x2 DJI Mic 3 Magnet
- x2 DJI Mic 3 Magnetic Clip
- x2 DJI Mic 3 Carrying Pouch
Performance That Speaks
- Lightweight & Intuitive, Compact Storage
- 4TX + 8RX Capability & Four-Channel Output
- Adaptive Gain Control for Balanced Volume
- Three Voice Tone Presets, Two-Level Noise Cancelling
- Dual Band Anti-Interference, Lossless Audio Transmission
- Dual-File 32-bit Float Internal Recording
- Integrated Timecode for Seamless Editing
- Extended Operating Time & Fast Charging
The charging case can store the transmitter with the windscreen installed, and also with the magnet or magnetic clip attached. Inside the charging case lid, you can store the magnet, magnetic clip, or locking audio adapter cable. To prevent receiver screen damage, avoid stacking items in the charging case.
To achieve the 4TX + 8RX setup or four-channel output, additional accessories must be purchased separately. The four-channel output feature is only supported by certain Sony camera models (requiring the DJI Mic Series Camera Adapter) and certain computer software (via USB output). For details, refer to the compatibility list on the Downloads page of the official DJI Mic 3 website.
The Adaptive Gain Control feature can be configured via the receiver or the DJI Mimo app, and it is turned off by default.
The Voice Tone Preset modes can be selected via the receiver or the DJI Mimo app, with the default set to Regular.
The Noise Cancelling feature is turned off by default but can be activated and set to either Strong or Basic level through the receiver, DJI Mimo app, or device directly connected via the OsmoAudio™ ecosystem. When using the receiver with multiple transmitters, you can adjust the noise cancelling settings for each transmitter individually or for all transmitters simultaneously. When an Osmo Action 5 Pro, Osmo Action 4, or Osmo Pocket 3 is connected directly via OsmoAudio™, settings can be adjusted on the product interface. When the transmitter is directly connected to a smartphone, the settings can be adjusted within the Mimo app.
Operating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.
Both the transmitter and receiver support 3C fast charging, allowing them to reach 80% charge in just 18 minutes. When the transmitter and receiver are idle and their battery levels drop below 25%, a 5V charger can extend their running time by 2 hours with just 5 minutes of charging. Data was collected in a controlled environment and should be taken as reference only.
In The Box:
- x2 DJI Mic 3 Transmitter
- x1 DJI Mic 3 Receiver
- x1 DJI Mic 3 Charging Case
- x1 DJI Mic 3 Mobile Phone Adapter (USB-C)
- x1 USB-C to USB-C Data Cable
- x1 DJI Mic 3 Locking Audio Adapter Cable (3.5mm TRS to TRS)
- x2 DJI Mic 3 Windscreen (Black/Gray)
- x2 DJI Mic 3 Windscreen (Black)
- x2 DJI Mic 3 Magnet
- x2 DJI Mic 3 Magnetic Clip
- x2 DJI Mic 3 Carrying Pouch